akademi-logo

Wet Alarm Valve

Catalog Code: Y-4010

Wet Alarm Valve Y-4010

The wet alarm valve is designed for applications where water is not likely to freeze. The water, which is pressurized in the pipes, is discharged into the fire zone when the sprinklers are activated due to fire. While the pressurized water system is continuously fed, it also fills the delay cell at the same time. After the cell is full, the pressure switch on the cell is triggered. The pressure switch transmits alarm information to the fire alarm system or automation system. After the pressure switch is triggered, the water reaches the water motorized gong and provides a mechanical alarm.

Specially designed for all wet pipe systems. Sensitive delay cell prevents false alarms under different pressures. Trim set suitable for vertical use. Semi-assembled.

Specifications

• Nominal Diameter

DN65

DN80

DN100

DN125

DN150

DN200

• Casting Type

Cast Iron

Standarts

FM UL CE GOST
TSE EAC

Applications

Sources Code Lang Download Add to Package
Wet Alarm Valve - UL UL English
Wet Alarm Valve - FM FM English
Wet Alarm Valve - CE CE English
Wet Alarm Valve - UKCA UKCA English
Wet Alarm Valve - EAC EAC English
Wet Alarm Valve - TSE TSE English
Sources Code Lang Download Add to Package
Sources Code Lang Download Add to Package
Wet Alarm Valve - UL UL English
Wet Alarm Valve - FM FM English
Wet Alarm Valve - CE CE English
Wet Alarm Valve - UKCA UKCA English
Wet Alarm Valve - EAC EAC English
Wet Alarm Valve - TSE TSE English

The wet alarm valve is designed for applications where water is not likely to freeze. The water, which is pressurized in the pipes, is discharged into the fire zone when the sprinklers are activated due to fire.

Size daha iyi bir hizmet verebilmek için sitemizde çerezlere yer veriyoruz. Sitemizi kullandığınız sürece Gizlilik ve çerez politikamızı kabul etmektesiniz. Çerez Politikamız ve Aydınlatma metnimize ulaşmak için tıklayınız – Kabul ediyorum -