Pressure Reducing Control Valve - ZSJF
Catalog Code: ZSJF
Pressure Reducing Control Valve - ZSJF
The pressure reducing hydraulic control valves are used for reducing the high pressure value in the water conduction network to a desired lower value. The pressure reducing control valves protect the exit pressure value without affected from flow and flowrate changes. The pipe diameter is not considered while selecting the valve diameter. The valve diameter can be selected as the smaller or a little bit larger value of the pipe diameter. The cavitation values must be considered while selecting the valve diameter
Specifications
The pressure reducing hydraulic control valve works fully automatic with the network pressure without needing any extra energy source.
The two way pressure reducing pilot valve placed on the control valve reduces the exit pressure to a desired value without affected from the flowrate changes.
The valve fully opens itself when the entrance pressure value in the network reduces to below the desired exit pressure value.
In water conduction networks which have variable flowrate value, it is recommended that to use the smaller pressure reducing control valve diameter than the present pressure reducing control valve diameter as a by-pass line.
The valve shuts itself down automatically when there is no water in the network.
Specifications
• Nominal Diameter
DN80
DN100
DN150
• Certificate
FM
• Dimensions
3”
4”
6”
Standarts
